Noticias

Under the condition of high current technology, the application research of transition element made by explosive cladding method points out that the explosive cladding can be used to make transition conductive element of electrolytic kiln. Aluminum clad steel bimetallic explosive welding blocks often receive high temperature and long-term effects in use, because they are used as cathodes and anodes in electrolytic smelting devices. In order to reduce the intermetallic compounds and heat loss in the bonding zone, one method is to preferentially use a flat interface without melting, and the other method is to install a barrier on the interface to prevent diffusion. For example, transition joints with 2mm titanium interlayer can withstand higher temperatures than direct Al-steel composite joint, including processing and service conditions.
 

Henan Chalco clad is professional on producing aluminum clad steel bimetallic explosive welding blocks used in alumina electrolytic kiln. Aluminum clad steel bimetallic explosive welding blocks , base plate No. Q235B, size 40X1200X S000ram, cladding is pure aluminum 1070, size 12X 1250X6100iran, support height between cladding aluminum plate and base plate is llmm.